Recent Submissions

  • Optical and Electrical Properties of Antimony and Fluorine Doped Tin Oxide Thin Films 

    Saw Lin Oo; Zayar Thu; Than Zaw Oo; Pho Kaung (Universal Journal of Physics and Application, 2017)
    The Sb:F:SnO2 layers (AR) were prepared by spray pyrolysis method. The anti-reflective layers (AR) heat-treated at 500°C for 30 min (solution amount 20 cc and 25 cc) have shown an improved crystallinity with crystallite ...
  • Case Study on Innovative Projects in Science Fair-2015, University of Yangon 

    Myo Aung (Journal of Thai Interdisciplinary Research, 2014)
    Science Fair is University of Yangon (UY)’s main event of the year and paves a way for students to thinking about scientific/technological process. Even the undergraduate students can show off their business in Innovative ...
  • Light Trapping Effect of SnO2Nanoparticles for Solar Cell Application 

    Cho Cho Thet; Hla Toe; Cho Cho; Aye Aye Myint (Transactions on GIGAKU, 2014)
    Chemical synthesis of SnO2 nanoparticles (NPs) were prepared by co-precipitation method using the stannous chloride (SnCl2.2H2O) as a precursor and ammonia solution as a precipitating agent. The as-synthesized SnO2 colloids ...
  • Model Based Path Finding Algorithm for Intelligent Mobile Robot 

    Kyawt Kyawt Yee; Zaw Min Aung; Hla Myo Tun (Proceedings of the Second International Conference on Science and Engineering organized by Ministry of Science and Technology on December 2-3, 2010 at Sedona hotel, Yangon, Myanmar, 2010)
    In this paper, a model-based path finding algorithm is presented. The proposed algorithm aims to provide a most reasonable trajectory for an intelligent mobile robot in dangerous area where human cannot enter. This algorithm ...
  • Design and Analysis of PID Controller for DC Servomotor Control System 

    Zu Zu Tin Win; Tin Tin Hla (Proceedings of the Second International Conference on Science and Engineering organized by Ministry of Science and Technology on December 2-3, 2010 at Sedona hotel, Yangon, Myanmar, 2010)
    The objective of the system is to design and analyse PID controller for DC servo control system. The aim of the system is to develop proportional, integral and derivative controllers for the DC servomotor of the second ...
  • Power Line Interference Cancellation for ECG 

    Aung Soe Khaing; Zaw Min Naing; Hla Myo Htun (2010)
    Power line interference corruption is a major problem in Electrocardiogram (ECG) recordings. For further processing such as QRS-complex detection and HRV analysis, cancellation of the power line noise plays a vital role ...
  • Detection of Signal for Radar Navigational System Using MATLAB 

    Theingi Win Hlaing; Hla Myo Tun; Zaw Min Naing (2010)
    This paper aims to evaluate the performance of target detection in the presence of sea clutter. Radar detection of a target against a background of unwanted clutter due to echoes from sea clutter or land is a problem ...
  • Implementation of the Wavelet Transformation for Image Compression System 

    Pann Ei San; Hla Myo Tun; Zaw Min Naing (2010)
    Image compression can be used to reduce the size of the image before transmission it. The compressed image retains many of the original image’s features but requires less bandwidth. This paper proposes to show how to ...
  • Development of Altitude Control System for Autonomous Flight Vehicle 

    Pa Pa Winn San; Zaw Min Aung; Chaw Myat Nwe; Zaw Min Naing (2010)
    The purpose of doing this research is to develop and implement altitude control system for holding of aerial vehicle. This paper emphasizes on the longitudinal stability control system. Experimental autonomous flight ...
  • Phase-lock Loop Design in Digital Receiver 

    Aye Su Mon; Zaw Min Naing; Kyawt Khin (2010)
    This paper presents the design of phase-lock loop in which composed of voltage control oscillator (VCO), loop filter, phase detector and prescalar. Design and development of local oscillator (LO) module which delivers ...
  • Analysis of a Realistic Mobility Model for Mobile Ad Hoc Networks 

    Kyaw Soe Lwin Lwin; Zaw Min Naing (2010)
    In order to conduct the simulation of the Mobile Ad hoc Networks (MANETs), the movements of the mobile nodes should be predicted very close to real world movements. In practice, ad hoc routing protocols make routing ...
  • Construction of High Voltage Power Supply Unit for GM Counter 

    Khin Kyu Kyu Hlaing; Mya Sandi (2010)
    High Voltage Power Supply Unit is essential for nuclear radiation detection or counting system. A high voltage power supply unit that is suitable to use with GM (Geiger Muller) counter is constructed with locally available ...
  • Design and Implementation of High Gain High Stability Power Amplifier for X band Radar Transmitter 

    Htun Myint; Zaw Min Naing; Hla Myo Tun (2010)
    Power Amplifier (PA) is an important part of transmitter’s front end. The main function is to amplify extremely high gain high stability power amplifier for radar transmitter. In this paper, PA used in transmitter portion ...
  • Acoustic Echo Cancellation Using Adaptive Least Mean Square Algorithm 

    Chaw Myat Nwe; Zaw Min Naing; Hla Myo Tun (2010)
    In telephony system, the received signal by the loudspeaker, is reverberated through the environment and picked up by the microphone. It is called an echo signal. This is in the form of time delayed and attenuated image ...
  • Implementation of Neural Network based Illicit Object Detection for Enhanced Security 

    Hnin Aye Khaing; Zaw Min Aung; Hla Myo Tun (2010)
    This paper presents the development technique of an automated illicit object detection system in aviation security using X-ray screening where classification phase is being implemented by artificial neural network. ...
  • Development of Hand Safety Control System for Press Brake CNC Machine Using Laser 

    Kyaw Thu Htet; Maung Maung Latt; Hla Myo Tun (2010)
    This paper presents a laser control scheme for press brake CNC machine applied to the operator’s safety security. Press Brake Safety System is designed to keep operators safety while operating press brake machines. ...
  • Image Recognition in Tools Detection System for CNC Milling Machine 

    Lu Maw; Maung Maung Latt; Hla Myo Tun (2010)
    This paper intends to implement the digital image processing analysis for industrial robotic control system. In this paper, tool changing control system is built to check the tool magazine's places to put or take the ...
  • GSM Technology over Satellite for Disaster Management in Myanmar 

    Cho Thet Paing; Srinivasan, P.K. (2010)
    Telecommunication systems play an ever-increasing and important role in ensuring timely and effective responses to emergency services. The rescue phase in which the promptness of action can save many lives during and ...
  • Implementation on Monitoring and Interfacing of SCADA Based Natural Fertilizer Packaging Process 

    Aye Aye Thet; Zaw Min Aung; Chaw Myat Nwe (2010)
    In many industries, Supervisory Control and Data Acquisition (SCADA) system was being used to control easily and simply. This system is a computer control and software application. This paper describes implementation ...
  • GPS and Microcontroller Interfacing for Vehicle Warning System 

    Tin Hla Win; Chaw Myat Nwe; Zaw Min Aung; Zaw Min Naing (2010)
    The global positioning system (GPS) has solidified its presence as a dependable means of navigation by providing absolute positioning in various applications. Coordination of vehicles in high-density traffic increases ...

View more